How to fix a doorknob?

When a door knob has some kind of fault, it is best to change it immediately. One of the most important aspects is to keep in mind that a knob with similar characteristics must be purchased.

Last update: June 09, 2021

Handles can gradually deteriorate from constant use or lack of maintenance. This condition causes the gates to have to be forced and the plates look loose, so it is essential to change them urgently. Discover in this article how to fix a doorknob!

The handles must always be in good condition because they provide security and aesthetics to the doors. Thus, to avoid further damage, the change of the knobs must be carried out when the first faults are detected. In addition, it is possible that the same inhabitants carry out the process and save the cost of labor.

What does it take to fix a doorknob?

To fix a door knob you need to have the corresponding tools to disassemble each part that holds that element. That way, It is essential to use a screwdriver that fits the size and type of screws that are present on the plates.

A lock lubricant is another essential resource, as it helps loosen the knob more easily. In addition to this, the new knob to be installed must be on hand.

Step by step to fix a doorknob

Fix a doorknob It is a process that can be carried out if you have the information precise. Below is the exact step by step to successfully change the faulty handles.

When cleaning a door knob we can notice if it is broken or needs replacement. This is a good time to spot faults.

1. Loosen the screws that fix the knob

In the first measure, the corresponding thing is to loosen all the screws that are securing the knob that needs to be removed. This step has to perform both on the outside and inside the door so that the two knobs involved can be removed.

The purpose of this first phase is to remove the trim, that is, the veneer that covers the handle and provides it with aesthetics. In this way, the knob begins to be free and without its greatest layer of security.

It is important that the person memorize the position of each screw so that you do not have problems when fitting the new latch.

Keep reading: 5 tricks to get a broken key out of a lock

2. Apply lock lubricant to the knob

It is best to spray this liquid using a spray to help keep all the remaining parts of the knob lubricated. The intention is remove adhering dirt so that no part is stuck and can be easily moved.

Also, this product is necessary because it prevents excess dust from accumulating. And it is in charge of protecting the new knob that you decide to place.

3. Remove the ball and the handle that make up the pommel

After removing the trim, it can be seen that the knob has a button called nipple. This element is the one in charge of pressing the ball and the grip so that the two parts are compact and support each other.

That button has to be pressed to unhook the two pieces and proceed to remove them. Thus, what needs to be done is to keep the pin depressed at all times and pull out both parts of the knob with the help of the screwdriver.

After that, the nipple also has to be turned so that it starts to come out little by little and the entire knob is finished disassembling. The process must be carried out in the same way on the outside and inside of the door.

4. Fit the new knob

First of all, keep in mind that the new knob must have similar characteristics to the previous one so it can fit seamlessly.

The first piece to install is the latch. It has to be well screwed, because it is the base that provides stability and assurance to the knob.

Then it is time to place the main knob. To do this, the trim must be screwed around the door opening and the knob bar must be inserted through these two cavities. In addition, the handle must be hooked and secured with the pin so that it will not come loose.

As a final step, you have to place the knob on the other side of the door. In this way, you must install the other trim, fit the second knob to the bar that holds the main knob, add the grip and link the corresponding pin.

Door handles aren't just used for opening and closing. Other jobs wear out the material.

Discover: 8 tips for cleaning glass doors

How to extend the useful life of a door knob?

The doorknobs are exposed to bad weather and dirt. Thus, it is important to maintain them at least once a month. A lock lubricant should be applied that is responsible for removing lumps and allowing all parts of the latch to have optimal mobility.

It is important that the doors are treated with the utmost care when opening or closing, as bad forces can deform the materials. In addition, the knobs can be cleaned at least once a week with vinegar or a mixture of ammonia and water to preserve their original shine.

It might interest you …

Add a Comment

Your email address will not be published. Required fields are marked *