How do you clean the toilet tank?

Depending on the state of the toilet tank, you will have to apply more or less powerful measures. Find out what they are.

Last update: February 18, 2022

The inside of the toilet tank may not be exposed like the bowl, but it does harbor a lot of dirt. Rust and mold are usually the main problems. These are not only capable of causing bad odours, but also compromise the useful life of the toilet.

Thus, it is necessary to clean the toilet tank from time to time. How is it done? Fortunately, it’s easier than it sounds. Let’s do it!

What do you need to clean the toilet tank?

You can’t skip cleaning the toilet tank! Although this is your first time, try not to be the last And be prepared to do it every once in a while.

Gather the following products and tools to remove any traces of dirt:

  • Hand brush (with long handle).
  • White vinegar: 3 gallons.
  • Rubber gloves.
  • Disinfectant.
  • Sponge.
  • Towel.

You will wonder why vinegar and why so much. The reason is that, in addition to being economical and natural, this product effective in removing rust, mildew and the calcium deposits that form in this area. Also, it is recommended to choose a white vinegar and not another variety, as it could stain the toilet.

Bathroom cleaning often overlooks the inside of the toilet, but that’s a mistake.


How do you clean the toilet tank?

The procedure is very simple. Below we detail each of the steps to make it look shiny.

1. Find the water valve

The water valve responsible for filling the toilet tank it is usually on the wall behind the tank or, failing that, at the base of the toilet. Once you locate it, turn it (clockwise) to close it.

Why is this so important? Please note that the tank must be empty during cleaning. Which brings us to step number 2.

2. Empty the toilet tank

Put on your gloves, remove the toilet lid and place it on a towel on the floor. Then, download the toilet until the tank is completely empty.

Depending on the size, this could take 2-3 downloads. Also, if you don’t want to waste water, you can use it to clean the toilet bowl.

3. Inspect the toilet tank

When you have a new tank or the water supply in your area of ​​residence is constant, the process is simplified. You will only need to scrub the inside of the water tank well with the help of the brush and the disinfectant.

However, if you notice a rust stain on the bottom or mineral formations on top, you will have to resort to heavy artillery. In other words, white vinegar.

Lastly, no matter how bothersome tank stains are to you; do not use bleach Chlorine can kill the system that allows the toilet to work. Cases of dissolved flapper valves have been reported from this product.

4.1 Clean with disinfectant

If you will be using disinfectant, follow each of the following steps:

  1. Begin by spraying the walls and floor of the warehouse with disinfectant.. Of course, avoid metal parts, since they are prone to corrosion.
  2. Let the disinfectant act for 10 minutes.
  3. Take the brush and start carving the walls, floor and corners of the tank. Don’t use the toilet brush! Otherwise, you will end up introducing unwanted bacteria.
  4. With the help of the sponge, clean the parts of the toilet system (the ball float, the chain, the filler tube). Consider spraying the disinfectant on the sponge and not directly on the metal components.
  5. To end, open the water valve and let the tank fill. Then rinse a few times and voila!

4.2 Clean with white vinegar

With white vinegar it is preferable to tackle tanks that are in a more critical state. The steps to follow are those:

  1. Fill the tank with white vinegar to the end of the overflow tube. This takes about 3 gallons, but could be more or less depending on size.
  2. Let the vinegar act for 12 hours.
  3. Once this time has passed, empty the tank and rinse it with water.
  4. Follow the same steps as the previous procedure, cleaning with disinfectant and the brush.
  5. Open the valve, rinse and make sure there are no traces of dirt left!
The entire toilet should be spotless most of the time.


How often should the toilet tank be cleaned?

It is suggested that this cleaning be done twice a year. This is enough to prevent the appearance of rust, mold and mineral deposits, as well as bad odors and damage to the parts of the tank system.

Emptying the toilet tank is also a good time to check that all the parts of this device are in correct condition. Keep in mind that if you flush multiple times, but it doesn’t finish draining, you’ll need to replace one of the pieces.

You might be interested…